Why Companies Aren’t As Bad As You Think

Tips of Replacing your Garbage Disposal

When you are thinking of replacing your garbage disposer, it can be very daunting process. When it comes to water and electricity people always have trepidation. The sink may leak since the sink connections are unfamiliar. You should learn how garbage disposal are since it is very easy to replace you garbage disposal. When you intend to buy a disposal unit, it is important that you check your old unit to ensure that it is not jammed. Jammed disposals are very common hence you should check your connection if the disposal unit is working well. When you are replacing your garbage disposal unit, you should consider the following factors.

Your electricity should be turned off. You should turn off your electricity for you to be sure that the disposal unit is not connected with an electric current. It is very beneficial that you turn off your electricity when you want to work on your disposal unit. You should remove the cover from the disposal unit. The cover is normally at the base of the disposal. You should loosen the screw and remove the wires connecting to the disposal unit.

There should loosening if the cover that cover the disposal unit. There should be removal of the hose for the fitting by loosening the hose clamp. The old unit should be removed once the bolt is lose. You should support the disposal unit from below for you to remove the disposal unit. The disposer should be rotated counterclockwise as the next step. This will be until the unit does fall away. To loosen all the three bolts, you should remove the remainder.

You should apply the putty. Putty is applied in times that you want to install the new drain. On the counter that is 1/2 thick, you should roll the putty. You should firmly press towards the sink hole when you stick the putty at the underside. When it comes to backing up the cardboard washer, you should back it up with the ring this is very important when you are finishing up the drain. There should be mounting of the snapping ring. The drain should be drained by retaining the snap into the drain.

There should be tightening of the bolts. The bolts can be tightened by use of a screwdriver. The sink should snug the drain. When you are looking to install a new drain this is important. You should perform wiring of the new disposer to make it flexible. You will be assisted by this when you are upgrading the disposal. You should then finish up by bring the wires into the conductor. Securing of the conductor is what you will manage to get by this process.

5 Uses For Plumbers

Practical and Helpful Tips: Professionals

You may also like...